EZGO RXV 48V Fuel and State-of-Charge Meter 612314
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- E-Z-GO RXV gas golf carts, 2008 and newer, with the matching fuel-level harness
- E-Z-GO RXV 48-volt electric golf carts, 2008 and newer, with the matching state-of-charge harness
- Converted or lithium RXV carts only after controller/BMS signal compatibility is confirmed
Product Overview
Owners buy this gauge when the original display is unreadable, stays empty or full, responds slowly, or is missing from the dash. A bad sender, battery pack, BMS, controller data, connector, or wiring can make a good gauge display the wrong level.
On a compatible gas RXV the meter displays fuel level; on a compatible 48-volt electric RXV it displays battery state of charge through the vehicle interface. It is not a universal voltmeter and should not be wired directly without the proper harness.
Match 612314, 48-volt RXV generation where electric, round dash opening, connector, gas or electric vehicle wiring, model year, controller/battery type, and product photos. Lithium conversions may not provide the original gauge signal.
Key Features & Performance
- Dual-application RXV dash gauge design
- Fuel-level display on compatible gas carts
- State-of-charge display on compatible 48-volt electric carts
- Round plug-in format for the matching factory connector
Replaces Part Numbers
- 612314
- 604015
- 610191
- 610583
Common Uses
- Replacing a faded or dead original RXV gauge
- Adding a gauge to a pre-wired compatible dash
- Restoring level information after wiring and sender diagnosis
Technical Specifications
- Product Type: Fuel / state-of-charge dashboard meter
- Vehicle Family: E-Z-GO RXV, 2008-up compatible applications
- Electric System: 48 volts when used as battery meter
- Condition: New aftermarket replacement
Installation & Fitment
- Turn the key off and disconnect battery power per the vehicle manual
- Confirm the connector and signal type before cutting the dash
- Use the specified round mounting opening
- Plug into the matching harness without forcing terminals
- Test against actual fuel or battery condition before final assembly
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application that is not shown above. Model year, production date, serial number, engine or equipment specification, installed options, and previous repairs can change fitment. Match the original part, reference number, dimensions, connectors, mounting points, and product photos before purchase.
Frequently Asked Questions
Q: Does this show fuel and battery at the same time? A: No. Its function depends on whether it is installed in a compatible gas or electric RXV system.
Q: Can I connect it straight across a 48-volt lithium pack? A: Do not assume so. The meter may rely on the RXV controller or BMS signal and the proper harness.
Q: Why does a new gauge still read wrong? A: Check the fuel sender, battery condition, BMS/controller communication, and wiring.
Q: Is this an original-equipment part? A: No. This is a new aftermarket product. Brand names and part numbers are used only to identify compatible applications.
Part Summary
keywords: EZGO 612314 RXV gauge, 48V RXV state of charge meter, 604015 fuel gauge replacement, RXV battery meter reads wrong, 2008 up EZGO dash gauge
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, specifications, and application before purchase.