48V Solenoid for 2007-2016 Yamaha G29 Drive Golf Cart | JU6-H1950-00
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- Yamaha G29 Drive Electric Golf Cart 2007
- Yamaha G29 Drive Electric Golf Cart 2008
- Yamaha G29 Drive Electric Golf Cart 2009
- Yamaha G29 Drive Electric Golf Cart 2010
- Yamaha G29 Drive Electric Golf Cart 2011
- Yamaha G29 Drive Electric Golf Cart 2012
- Yamaha G29 Drive Electric Golf Cart 2013
- Yamaha G29 Drive Electric Golf Cart 2014
- Yamaha G29 Drive Electric Golf Cart 2015
- Yamaha G29 Drive Electric Golf Cart 2016
Product Overview
When a fully charged cart produces no main-contactor click—or clicks but does not send pack voltage onward—the high-current solenoid may be burned or mechanically stuck. This four-terminal unit switches traction-battery power when the key, pedal switch, controller, and low-current circuit command it. Test the entire control circuit before replacing a part that may only be reporting another fault.
That distinction matters for buyers looking for the correct service part, not simply another similarly named item. Match system voltage, terminal count, mounting pattern, coil connections, and reference number.
Key Features & Performance
- 48-volt high-current switching contactor
- Four-terminal configuration for compatible G29 carts
- Restores power transfer after confirmed contact failure
- Aftermarket replacement for the original solenoid
Replaces Part Numbers
- JU6-H1950-00
- JU6-H1950-00-00
Common Uses
- Cart is silent when accelerator is pressed
- Solenoid clicks but high-current contacts do not pass voltage
- Terminals are heat-damaged or corroded
- Intermittent loss of drive traced to the contactor
Technical Specifications
- Product Type: Golf Cart Solenoid
- System Voltage: 48 Volts
- Terminal Count: 4
- Vehicle: Yamaha G29 Drive Electric
- Years: 2007-2016
- Replacement Type: Aftermarket
Installation & Fitment
- Place the cart in tow/service mode as specified
- Disconnect the battery pack using insulated procedures
- Label every cable before removal
- Torque terminals correctly without twisting the studs
- Verify key, pedal switch, fuses, controller, and pack voltage before returning to service
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown. Match system voltage, terminal count, mounting pattern, coil connections, and reference number.
Frequently Asked Questions
Q: Will a new solenoid fix a cart that will not move? A: Only if the solenoid is the failed component; batteries, cables, switches, controller, and motor faults can cause the same symptom.
Q: Is this a 36-volt part? A: No. It is listed for a 48-volt G29 Drive system.
Q: Why should terminals be torqued carefully? A: Loose joints overheat, while over-tightening can damage the stud or internal contact assembly.
Part Summary
keywords: Yamaha G29 48V solenoid replacement, JU6-H1950-00 contactor, Drive golf cart no click repair, G29 electric cart main solenoid, aftermarket Yamaha golf cart relay
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.