Skip to product information
SKU:
NLT1G02185
Ships for free in 2–4 business days.
12V 100A Dump Trailer Hydraulic Solenoid SAZ-4201GJ
$38.99
In Stock
$38.99
Sale price
$38.99
Regular price
This new aftermarket 12-volt four-terminal 100-amp intermittent-duty solenoid replaces SAZ-4201GJ, 07522, 391-2-C, and related references on compatible dump-trailer and hydraulic power units.
Estimated delivery between
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
Compatible equipment / model
- Monarch / Bucher hydraulic power units using 07522
- KTI dump trailer hydraulic systems using 391-2-C
- PJ Trailers and compatible dump-body power units using 190107
- RV leveling and compact hydraulic pump systems only when the same intermittent solenoid is specified
Product Overview
A pump motor that will not run, runs only after tapping the solenoid, or receives control voltage without output to the motor may have burnt contacts. Weak batteries, corroded grounds, remote controls, circuit breakers, cables, and a seized pump motor must be checked under load.
This switch is rated for intermittent hydraulic-pump operation, not continuous motor duty. Holding it energized beyond the system cycle can overheat the coil and contacts.
Match 12 volts, four terminals, 100-amp intermittent rating, curved mounting base, stud sizes, coil wiring, and original reference. Confirm the motor current is within the power-unit specification.
Key Features & Performance
- 12-volt coil with four-terminal circuit
- 100-amp intermittent-duty rating
- Curved mounting base for matching pump units
- Replacement for pitted contacts or heat-damaged studs
Replaces Part Numbers
- SAZ-4201GJ
- SAZ4201GJ
- SAZ-4201ER
- 07522
- 7522
- 070009
- 190107
- 391-2-C
Common Uses
- Repairing a dump trailer that clicks but will not raise
- Replacing a solenoid with excessive voltage drop
- Correcting intermittent hydraulic pump motor power
Technical Specifications
- Product Type: Hydraulic pump motor solenoid
- Voltage: 12 V DC
- Current Rating: 100 A intermittent duty
- Condition: New aftermarket replacement
Installation & Fitment
- Lower and support the dump bed mechanically
- Disconnect the battery and verify stored hydraulic energy is controlled
- Label motor, battery, and control terminals
- Use clean tight lugs and protective boots
- Cycle briefly while checking current, heat, and leakage
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application that is not shown above. Model year, production date, serial number, engine or equipment specification, installed options, and previous repairs can change fitment. Match the original part, reference number, dimensions, connectors, mounting points, and product photos before purchase.
Frequently Asked Questions
Q: Can I use this as a continuous-duty battery contactor? A: No. It is an intermittent-duty hydraulic pump solenoid.
Q: Why does the solenoid click but the pump not run? A: Battery voltage, cable resistance, bad contacts, motor failure, or a seized pump can all cause that.
Q: Is it safe to work under a raised dump bed? A: Only when it is supported by the approved mechanical safety prop and all stored energy is controlled.
Q: Is this an original-equipment part? A: No. This is a new aftermarket product. Brand names and part numbers are used only to identify compatible applications.
Part Summary
keywords: SAZ-4201GJ dump trailer solenoid, 07522 hydraulic pump relay, 391-2-C replacement, 12V 100A intermittent solenoid, dump bed clicks will not raise
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, specifications, and application before purchase.