MCOR 4 Throttle Potentiometer for 2012-Up Club Car Precedent / DS - 105116301
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- Club Car Precedent 48V Electric with MCOR 4 (2012-up)
- Club Car DS 48V Electric with MCOR 4 (2012-2014)
- Club Car Carryall 48V Electric with MCOR 4
- Pre-2012 carts only when fitted with the correct MCOR conversion kit, not included
Product Overview
A cart that jerks, hesitates, surges, or refuses to move when the accelerator is pressed may have an erratic MCOR signal after batteries, cables, controller faults, solenoid operation, and motor wiring are checked. The MCOR 4 converts pedal movement into the throttle signal used by the motor controller.
This is a direct match for carts already equipped with the MCOR 4 layout. Earlier MCOR versions need the correct conversion kit, so inspect the plug, pedal linkage, mounting holes, and number on the removed unit before ordering.
Key Features & Performance
- Restores a smooth accelerator-position signal
- Made for compatible 48V Club Car electric systems
- Direct replacement for carts already using MCOR 4
- Useful for intermittent movement after circuit diagnosis
- Cross-references 105116301 and related MCOR numbers
Replaces Part Numbers
- 105116301
- 103850401
- AM293101
Common Uses
- Correcting pedal dead spots traced to the MCOR
- Repairing jerky or delayed acceleration
- Replacing a moisture-damaged throttle sensor
- Completing an MCOR conversion when the required separate kit is already installed
Technical Specifications
- Product Type: MCOR 4 throttle potentiometer
- System: 48V electric golf cart
- Signal: Accelerator position
- Application: Club Car
- Condition: New
- Reference: 105116301
Installation & Fitment
- Place the cart in tow/service mode and disconnect the battery pack
- Scan or test the controller circuit before condemning the MCOR
- Match the connector and mechanical linkage to the removed unit
- Route wiring clear of pedal movement and sharp edges
- Reconnect power and verify a smooth throttle signal before driving
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown.
Confirm the cart already uses MCOR 4, then match 105116301, the electrical plug, mounting pattern, pedal linkage, and 48V controller system. Model year, production date, serial number, trim, engine, installed options, and previous repairs can affect fitment.
Frequently Asked Questions
Q: Can a weak battery pack feel like a bad MCOR? A: Yes. Low pack voltage, corroded cables, a failing solenoid, and controller faults can also cause hesitation, so diagnose the drive circuit first.
Q: Will this plug directly into every pre-2012 Precedent? A: No. Earlier carts generally need an MCOR conversion kit matched to their original system.
Q: What should I compare before ordering? A: Confirm the cart already uses MCOR 4, then match 105116301, the electrical plug, mounting pattern, pedal linkage, and 48V controller system.
Q: Is this supplied by the original equipment manufacturer? A: No. This is a new aftermarket part. Brand names and reference numbers identify fitment only.
Package note: One MCOR 4 throttle potentiometer is included; pre-2012 conversion hardware is not included.
Part Summary
keywords: Club Car MCOR 4 replacement, 105116301 throttle potentiometer, Precedent jerky acceleration fix, Club Car pedal sensor, 48V golf cart MCOR, 103850401 replacement
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.