6 Prewound 0.065-Inch Trimmer Spools with Cap for WORX WA0010-Compatible Trimmers
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- WORX WG150
- WORX WG151
- WORX WG151.5
- WORX WG152
- WORX WG153
- WORX WG154
- WORX WG155
- WORX WG155.5
- WORX WG156
- WORX WG157
- WORX WG160
- WORX WG160.1
- WORX WG160.2
- WORX WG163
- WORX WG165
- WORX WG170
- WORX WG175
- WORX WG180
Product Overview
Each spool carries approximately 10 feet of 0.065-inch line. Match the spool diameter, center hub, cap tabs, and trimmer model—WORX advises these spools for compatible 20V and 32V designs, not every 40V or 56V tool.
This kit is for the common moment when the line is gone, the spool is cracked, or the cap has disappeared in the grass. The spools arrive wound, so there is no hand-winding before the next trim.
Key Features & Performance
- Six prewound line spools
- One replacement spool cap
- Approximately 10 ft of line per spool
- 0.065-inch trimmer line
Replaces Part Numbers
- WA0010
Common Uses
- Replacing a confirmed failed or damaged trimmer spool and cap set
- Correcting the symptoms described in the product overview after testing related parts
- Restoring dependable operation during repair or scheduled service
- Matching one of the listed reference numbers or compatible applications
Technical Specifications
- Quantity: 6 spools + 1 cap
- Line Diameter: 0.065 in.
- Line Length: Approximately 10 ft per spool
- Replacement Type: Aftermarket
Installation & Fitment
- Remove the battery before opening the spool head
- Clean grass from the cap and feed eyelets
- Seat the spool and route line through the eyelet
- Snap the cap fully into both locking tabs
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown.
Model names alone do not guarantee fitment. Production dates, serial-number breaks, engine packages, wiring, and installed options can change the part used on otherwise similar equipment.
Frequently Asked Questions
Q: What problem is this part commonly used to address? A: This kit is for the common moment when the line is gone, the spool is cracked, or the cap has disappeared in the grass. The spools arrive wound, so there is no hand-winding before the next trim.
Q: How should fitment be confirmed? A: Match the original part number first, then compare the connector or fittings, mounting points, dimensions, and machine or engine serial information.
Q: Is this an original equipment manufacturer part? A: No. This is an aftermarket replacement part for compatible applications.
Q: Can another fault cause similar symptoms? A: Yes. Wiring, grounds, hoses, filters, related controls, and mechanical wear should be tested as part of the diagnosis.
Q: What should be checked after installation? A: Confirm secure connections, normal operation, and no leaks, heat, binding, or warning indications before returning the equipment to service.
Part Summary
keywords: WORX WA0010 spool replacement, six pack 0.065 trimmer line, WG163 spool and cap, prewound weed eater line, WORX 20V trimmer refill, aftermarket WA0010 kit
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.