Skip to product information
SKU:
NLT2D07020
Ships for free in 2–4 business days.
Honda Rancher 350 Choke Cable & Starter Valve Plunger Kit 2000-2006
$29.99
In Stock
$29.99
Sale price
$29.99
Regular price
Aftermarket choke cable and starter valve plunger kit for 2000-2006 Honda Rancher 350 TRX350FE, TRX350FM, TRX350TE, and TRX350TM ATVs.
Estimated delivery between
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
Compatible equipment / model
- Honda Rancher 350 TRX350FE 4x4 ES — 2000-2006
- Honda Rancher 350 TRX350FM 4x4 — 2000-2006
- Honda Rancher 350 TRX350TE 2x4 ES — 2000-2006
- Honda Rancher 350 TRX350TM 2x4 — 2000-2006
Product Overview
A Rancher that only starts with extra coaxing, stays on fast idle, or has a choke knob that feels stiff may have more than one worn part. This kit replaces both the cable and the carburetor starter plunger so the enrichment circuit can open for a cold start and fully close once the engine warms up.
It is a practical repair after the cable has stretched, the plunger has stuck from old fuel, or the rubber seal no longer seats. Confirm the cable ends and starter-valve shape against the parts removed from the ATV.
Key Features & Performance
- Includes choke cable and starter valve plunger
- Restores manual choke movement at the carburetor
- Useful when the original cable is seized, stretched, or broken
- Aftermarket replacement for a matched fuel-control repair
Replaces Part Numbers
- 17950-HN5-671
- 16046-HM5-730
- DPSCR262
Common Uses
- Choke knob will not pull or return
- Hard cold starting after carburetor service
- Engine remains rich because the plunger will not seat
- Replacing a frayed cable and worn starter valve together
Technical Specifications
- Product Type: Choke cable and starter valve plunger kit
- Fuel System: Carbureted
- Replacement Type: Aftermarket
- Primary Application: Cold-start enrichment control
Installation & Fitment
- Work on a cool engine and shut off the fuel supply
- Route the cable along the original path without sharp bends
- Clean the starter-valve bore before fitting the new plunger
- Confirm free travel and full seating before starting
Compatibility Notice
Rancher 350 model code, cable length, threaded carburetor fitting, and plunger tip must match. A clogged pilot circuit, vacuum leak, or low compression can cause similar starting trouble.
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown.
Frequently Asked Questions
Q: Will this fix a Rancher that only starts with the choke? A: It can help when the cable or starter plunger is sticking, but the pilot jet, intake boot, valve clearance, and compression should also be checked.
Q: Does it fit every Rancher 350? A: It is listed for the 2000-2006 TRX350FE, FM, TE, and TM models; compare the original cable and plunger before ordering.
Q: Why replace both pieces? A: A new cable cannot correct a corroded or damaged plunger, and a new plunger cannot correct a seized cable.
Q: Is carburetor adjustment required? A: Usually the choke travel needs to be checked; other tuning may be needed if the carburetor was removed or cleaned.
Part Summary
keywords: Honda Rancher 350 choke cable replacement, TRX350 starter valve plunger, 17950-HN5-671 cable fit, 16046-HM5-730 plunger, Rancher hard cold start part, aftermarket Honda ATV choke kit
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.