2015-2017 Ford F-150 Right LED BLIS Tail Light | HL3Z-13404-D
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- Ford F-150 (2015) with factory LED tail lamps and BLIS
- Ford F-150 (2016) with factory LED tail lamps and BLIS
- Ford F-150 (2017) with factory LED tail lamps and BLIS
- Excludes Ford F-150 Raptor and factory halogen/non-BLIS configurations unless independently verified
Product Overview
This lamp is for a very specific repair: the passenger rear of an LED-equipped F-150 with blind-spot hardware after impact, water intrusion, broken mounting tabs, or lamp failure. It is not a conversion for halogen trucks and the BLIS sensor or module must be transferred if not included.
Confirm LED versus halogen, BLIS provision, passenger side, connector, bed style, and all reference numbers. A lamp can look correct in photos and still be electrically incompatible.
This is a high-quality aftermarket replacement or service part and is not manufactured or supplied by the original equipment brand.
Key Features & Performance
- Right passenger-side housing for factory LED and BLIS configuration
- Restores rear lighting and proper sensor mounting provision
- Direct body mounting layout for matching 2015-2017 trucks
- Aftermarket collision-repair lamp identified by Ford references
Replaces Part Numbers
- HL3Z-13404-D
- FL3Z-13404-C
- FL3Z-13404-D
- FL3Z-13404-F
- FO2801259
Common Uses
- Replacing a cracked passenger lamp after bed-corner impact
- Correcting moisture intrusion or failed integrated LED elements
- Restoring BLIS sensor mounting after lamp-housing damage
Technical Specifications
- Product Type: LED tail light assembly
- Position: Rear right passenger side
- Safety System Provision: BLIS-compatible housing
- Lighting Conversion: Not intended for halogen conversion
- Replacement Type: Aftermarket
Installation & Fitment
- Disconnect power and protect the BLIS sensor from static and impact
- Transfer the original sensor or module only when compatible and required
- Seal connectors and inspect bed-side mounting geometry
- Verify every lamp function and complete any required BLIS calibration before road use
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown. Model names and year ranges alone may not guarantee fitment. Always compare the original component, reference number, dimensions, connectors, engine or vehicle identification, and installed configuration before purchase.
Frequently Asked Questions
Q: Does the tail light include the BLIS sensor? A: Do not assume it does; the sensor or module is commonly transferred from the original lamp.
Q: Can this upgrade a halogen F-150 to LED? A: No direct conversion is claimed. Wiring and control modules differ.
Q: Will it fit the driver side? A: No. This is the right passenger-side assembly.
Q: How should final fitment be confirmed? A: Match the original component and every listed identifier and physical detail; contact Northline Parts with the model, serial number, VIN, engine code, or clear photos when additional help is needed.
Part Summary
keywords: F150 right LED tail light, HL3Z-13404-D replacement, 2015-2017 F150 BLIS lamp, Ford passenger tail lamp, F150 blind spot tail light repair
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.