Skip to product information
SKU:
NLT1I00858
Ships for free in 2–4 business days.
8-Piece Delphi Harness to EV1 Fuel Injector Adapter Set LS1 LS6
$34.99
In Stock
$34.99
Sale price
$34.99
Regular price
This new eight-piece adapter set connects a compatible LQ4, LQ9, 4.8L, 5.3L, or 6.0L Delphi-style engine harness to LS1, LS6, or LT1 EV1 fuel injectors.
Estimated delivery between
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
Compatible equipment / model
- GM LQ4 and LQ9 engine harness applications with Delphi/Multec injector connectors
- GM 4.8L, 5.3L and 6.0L Gen III truck-engine harnesses with matching Delphi connector
- LS1, LS6 and LT1 EV1-style fuel injectors with matching two-pin plug
Product Overview
An LS swap or injector change can stop at one small mismatch: the truck harness plug does not fit the EV1 injector. These plug-in pigtail adapters bridge that connector difference without cutting all eight injector wires from a usable harness.
Connector direction matters. This set is for a Delphi/Multec-style truck harness going to EV1-style injectors, as shown. It is not the reverse adapter. Compare both male and female ends, latch location, terminal count, wire polarity, injector height, rail fit, and calibration needs.
Key Features & Performance
- Eight adapters for a V8 injector set
- Converts compatible Delphi truck-harness connectors to EV1 injector plugs
- Avoids permanent splicing of the main harness
- Short plug-in leads simplify injector swaps
Common Uses
- Installing EV1 injectors on a truck LS harness
- Completing an LQ4 or LQ9 swap without cutting injector wiring
- Correcting a connector mismatch after an injector upgrade
Technical Specifications
- Product Type: Fuel injector connector adapter set
- Quantity: 8 adapters
- Harness Side: Compatible Delphi / Multec truck connector
- Injector Side: EV1 / Jetronic style
- Condition: New aftermarket set
Installation & Fitment
- Identify connector direction before ordering
- Inspect terminals for bent pins or loose locks
- Route adapters away from exhaust and sharp edges
- Secure excess lead length without pulling on injectors
- Confirm injector data and tune requirements before starting the engine
Compatibility Notice
Northline Parts does its best to list all known compatible models. The correct part may fit an application that is not shown above. Model year, production date, serial number, engine or equipment specification, installed options, and previous repairs can change fitment. Match the original part, reference number, dimensions, connectors, mounting points, and product photos before purchase.
Frequently Asked Questions
Q: Do these make any injector work with my engine? A: No. They solve a connector mismatch only; flow rate, impedance, height, rail, seals, and tuning must also be correct.
Q: Are eight included? A: Yes. The set is intended for eight injectors.
Q: Can they be used in reverse? A: No. Choose the adapter direction that matches the vehicle harness and injector connector.
Q: Is this an original-equipment part? A: No. This is a new aftermarket product. Brand names and part numbers are used only to identify compatible applications.
Part Summary
keywords: Delphi to EV1 injector adapters, LQ4 LQ9 injector harness conversion, LS1 LS6 EV1 plug adapters, 4.8 5.3 6.0 injector connectors, eight LS swap injector pigtails
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, specifications, and application before purchase.