Skip to product information
SKU:
NLT2T04988
Ships for free in 2–4 business days.
Miller 179385 / SA-4605-12-T 12V 46A Pull-Hold Solenoid with Coil Commander
$171.39
In Stock
$171.39
Sale price
$171.39
Regular price
This Miller 179385 / SA-4605-12-T pull-hold solenoid is a 12VDC, 46A Coil Commander-type actuator.
Estimated delivery between
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
Compatible equipment / model
| Brand / Family | Compatible Applications |
|---|---|
| Miller equipment | Applications calling for Miller 179385 / SA-4605-12-T Coil Commander solenoid |
Product Overview
The high-current pull circuit moves the plunger quickly, while the hold function keeps the commanded position with lower sustained demand. This design is used where dependable engine or machine actuation is required without leaving the pull winding energized continuously.
A failed controller, weak supply cable or poor ground can look like a bad solenoid; voltage should be checked under load.
Key Features & Performance
- Controlled engine actuation: Provides the electrical movement needed for the listed fuel-stop, shutdown or throttle linkage.
- Part-number driven fitment: Solenoids that look similar can differ in voltage, stroke, connector and hold circuit, so the exact reference matters.
- Troubleshooting-friendly replacement: Power supply, grounds and free linkage movement should be verified so an electrical or mechanical fault is not mistaken for a failed actuator.
- Product-specific note: A failed controller, weak supply cable or poor ground can look like a bad solenoid; voltage should be checked under load.
Technical Specifications
- Voltage: 12V DC
- Pull rating: 46A
- Type: Pull / hold solenoid with Coil Commander
Replaces / Reference Part Numbers
179385, SA-4605-12-T
Common Replacement Reasons
- Solenoid will not pull in or hold when commanded
- Engine will not shut down normally or will not remain running because the stop linkage is not being actuated
- Coil/connector failure after wiring, voltage and linkage movement have been verified
Frequently Asked Questions
How do I confirm this is the correct part?
Verify the Miller part number, 12V system, terminal arrangement, mounting and plunger travel before installation.
Is this an OEM part?
Unless the listing is explicitly identified as genuine/OEM in the product data, treat it as a replacement component. Use the verified reference numbers, equipment application and physical configuration above to match your original part.
What should I check before installation?
Linkage must move freely through the required stroke so the pull circuit is not overstressed.
Fitment note: Equipment manufacturers may use different components within the same model family based on engine, serial number or production date. Confirm the original part number and machine/engine details before ordering.