Kubota 12V Fuel Shutoff Solenoid 17454-60010 17594-60014
Let Northline Parts Do the Heavy Lifting for You!
Not sure which part you need? Our team can help you find the right replacement.
Parts Support Hours: Monday–Friday, 8:00 AM–5:00 PM CT
Live Chat: Available 24/7
I reached out for some replacement head bolts and they responded quickly with a few questions and cautionary information and is sending me some bolts. Great customer service! Thanks
Edward H. — Verified customer
Compatible Models
We do our best to list all compatible models. Although this may be the part you need, your exact model may not appear below.
- Kubota BX2200 tractor
- Kubota 05-series diesel-engine equipment specifying 17454-60010
- Kubota 05-series diesel-engine equipment specifying 17594-60014
Product Overview
When a BX2200 cranks normally but the injection pump stays in the stop position—or the engine will not shut down from the key—the shutoff solenoid and its feed circuit are logical checks. Confirm battery voltage and plunger movement before replacing it.
The solenoid pulls or holds the fuel-control mechanism in the run position depending on the original design. Connector, mounting holes, plunger length, and whether the unit uses pull and hold windings must match the removed part.
Key Features & Performance
- 12-volt fuel-control actuator
- Crosses to 17454-60010 and 17594-60014
- For compatible Kubota 05-series applications
- Restores electrical start/stop control after diagnosis
- New aftermarket solenoid
Replaces Part Numbers
- 17454-60010
- 17594-60014
Common Uses
- Repairing a diesel that cranks but the fuel rack remains shut
- Replacing a solenoid that will not release at key-off
- Correcting a burned pull or hold coil after wiring faults are repaired
Technical Specifications
- Product Type: Fuel Shutoff Solenoid
- Primary Application: Kubota 05-series diesel engines and BX2200
- Package Quantity: 1 solenoid
- Condition: New
- Replacement Type: Aftermarket
- Voltage: 12V
- References: 17454-60010; 17594-60014
- Function: Injection-pump fuel shutoff
- Application: Kubota 05 series / BX2200
- Condition: New aftermarket
Installation & Fitment
- Disconnect the battery and clean around the fuel-control area
- Verify voltage, ground, and timer operation first
- Compare plunger length and linkage travel before tightening
- Cycle the key repeatedly and confirm reliable start and shutdown
Compatibility Notice
Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown.
Model, production date, serial number, connector, dimensions, installed options, and previous repairs can affect fitment. Compare the original component and reference information before purchase.
Frequently Asked Questions
Q: Can the timer or controller cause the same symptom? A: Yes. The solenoid needs the correct pull and hold signals, so the control circuit must be tested.
Q: Should I force the fuel lever if the solenoid does not move? A: No. Binding linkage or pump damage should be corrected without forcing the mechanism.
Q: How do I confirm this is the correct part? A: Match both reference numbers, 12V rating, connector, mounting pattern, plunger or linkage, and engine serial information.
Q: Is this supplied by the original equipment manufacturer? A: No. This is a new aftermarket item. Brand, model, and part numbers are used only to identify compatible applications.
Part Summary
keywords: Kubota 17454-60010 solenoid, 17594-60014 fuel shutoff, BX2200 no start solenoid, Kubota 05 series stop solenoid, 12V diesel cutoff actuator
Brand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.