{"title":"Ford F-150 Tail Lights","description":"\u003cp\u003eShop replacement tail lights for compatible Ford F-150 vehicles at Northline Parts. Compare the part's fitment, model year, specifications, and reference numbers before ordering.\u003c\/p\u003e\u003ch2\u003eFind the Right Ford F-150 Tail Lights\u003c\/h2\u003e\u003cp\u003eConfirm your vehicle year, trim, mounting position, and any relevant OE or interchange part numbers against each product listing. Different configurations may require different replacement parts.\u003c\/p\u003e\u003ch2\u003eHelpful Ford F-150 Parts Information\u003c\/h2\u003e\u003cp\u003eCheck the individual product pages for included components, fitment details, and installation considerations.\u003c\/p\u003e\u003ch2\u003eFord F-150 Tail Lights Buying Guide\u003c\/h2\u003e\u003cp\u003eNeed help choosing the right replacement? Read our \u003ca href=\"https:\/\/www.northlineparts.com\/blogs\/northline-parts-guides\/ford-f-150-tail-light-replacement-guide\"\u003eFord F-150 Tail Light Replacement: Side, Wiring and Equipment Checklist\u003c\/a\u003e for fitment checks, component differences, and ordering tips. Always verify the specific product listing before purchasing.\u003c\/p\u003e","products":[{"product_id":"left-driver-led-tail-light-w-blind-spot-for-ford-f-150-2021-2023-taillamp","title":"Left Driver LED Tail Light for 2021-2023 Ford F-150 with Blind-Spot Provision","description":"\u003cp\u003e\u003cstrong\u003eUse this aftermarket left LED tail light assembly on compatible 2021 Ford F-150 with matching LED tail lamp and blind-spot configuration, 2022 Ford F-150 with matching LED tail lamp and blind-spot configuration, 2023 Ford F-150 with matching LED tail lamp and blind-spot configuration after matching the original configuration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eA cracked lamp can admit water, cause LED failure, trigger lighting messages, and leave a newer F-150 without the correct blind-spot sensor mounting provision after a rear-corner impact.\u003c\/p\u003e\n\u003cp\u003eRestores the driver-side LED rear lighting housing on compatible F-150 trucks equipped for the matching blind-spot configuration. Model names, reference numbers, dimensions, and configuration checks are kept together so the replacement decision can be made from evidence rather than a generic category match.\u003c\/p\u003e\n\u003cp\u003eVerify left\/driver position, LED lighting, blind-spot provision, lens and connector design, trim level, production date, and whether the original sensor\/module must be transferred; a sensor is not assumed included.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRestores the driver-side LED rear lighting housing on compatible F-150 trucks equipped for the matching blind-spot configuration.\u003c\/li\u003e\n\u003cli\u003eApplication-specific dimensions and configuration should be compared with the original component\u003c\/li\u003e\n\u003cli\u003eCompatibility checks call out the connector, dimensions, engine, trim, or system details that can change fitment\u003c\/li\u003e\n\u003cli\u003eIntended for a confirmed left LED tail light assembly repair, replacement, restoration, maintenance need, or functional upgrade\u003c\/li\u003e\n\u003cli\u003eAftermarket replacement for the compatible applications listed below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2021 Ford F-150 with matching LED tail lamp and blind-spot configuration\u003c\/li\u003e\n\u003cli\u003e2022 Ford F-150 with matching LED tail lamp and blind-spot configuration\u003c\/li\u003e\n\u003cli\u003e2023 Ford F-150 with matching LED tail lamp and blind-spot configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the original left LED tail light assembly after its failure or service need has been confirmed\u003c\/li\u003e\n\u003cli\u003eRestores the driver-side LED rear lighting housing on compatible F-150 trucks equipped for the matching blind-spot configuration.\u003c\/li\u003e\n\u003cli\u003eAddressing the buying situation described in the overview: a cracked lamp can admit water, cause LED failure, trigger lighting messages, and leave a newer F-150 without the correct blind-spot sensor mounting provision after a rear-corner impact.\u003c\/li\u003e\n\u003cli\u003eCompleting a repair while also checking related components that could reproduce the same symptom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED tail light \/ taillamp assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Left \/ driver side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Ford F-150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Years:\u003c\/strong\u003e 2021-2023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlind-Spot Configuration:\u003c\/strong\u003e Provision for matching system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Type:\u003c\/strong\u003e Aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect vehicle power according to Ford service information\u003c\/li\u003e\n\u003cli\u003eInspect bed and lamp mounting points for collision distortion\u003c\/li\u003e\n\u003cli\u003eTransfer the original blind-spot sensor or module only when required and compatible\u003c\/li\u003e\n\u003cli\u003eTest every rear lamp function and scan\/calibrate driver-assistance systems as specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003eVerify left\/driver position, LED lighting, blind-spot provision, lens and connector design, trim level, production date, and whether the original sensor\/module must be transferred; a sensor is not assumed included. Northline Parts does its best to list all known compatible models, but the correct part may fit an application not shown. The original component, dimensions, connector or mounting details, equipment build data, and applicable service information remain the final fitment references.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e What does this replacement restore? \u003cstrong\u003eA:\u003c\/strong\u003e Restores the driver-side LED rear lighting housing on compatible F-150 trucks equipped for the matching blind-spot configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e What symptoms or repair need can point to this part? \u003cstrong\u003eA:\u003c\/strong\u003e A cracked lamp can admit water, cause LED failure, trigger lighting messages, and leave a newer F-150 without the correct blind-spot sensor mounting provision after a rear-corner impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Which applications are listed? \u003cstrong\u003eA:\u003c\/strong\u003e The known applications are 2021 Ford F-150 with matching LED tail lamp and blind-spot configuration; 2022 Ford F-150 with matching LED tail lamp and blind-spot configuration; 2023 Ford F-150 with matching LED tail lamp and blind-spot configuration. Verify left\/driver position, LED lighting, blind-spot provision, lens and connector design, trim level, production date, and whether the original sensor\/module must be transferred; a sensor is not assumed included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e What is the most important fitment check? \u003cstrong\u003eA:\u003c\/strong\u003e Verify left\/driver position, LED lighting, blind-spot provision, lens and connector design, trim level, production date, and whether the original sensor\/module must be transferred; a sensor is not assumed included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Is this supplied by the original equipment brand? \u003cstrong\u003eA:\u003c\/strong\u003e No. It is an aftermarket replacement for compatible applications and is not manufactured or supplied by the vehicle or equipment brand.\u003c\/p\u003e\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\u003cp\u003ekeywords: 2021 2023 Ford F-150 left tail light, driver LED taillamp replacement, F-150 blind spot lamp housing, truck rear collision light repair, Ford LED tail lamp water damage, left F150 taillight assembly\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42816472875079,"sku":"NLT1Q02354","price":223.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/116713569561-0.jpg?v=1779760971"},{"product_id":"for-ford-f-150-2015-2016-2017-right-led-tail-light-w-blind-spot-hl3z13405d","title":"2015-2017 Ford F-150 Right LED BLIS Tail Light | HL3Z-13404-D","description":"\u003cp\u003e\u003cstrong\u003eThis aftermarket right passenger-side LED tail light replaces HL3Z-13404-D on compatible 2015-2017 Ford F-150 trucks equipped for BLIS and factory LED lamps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis lamp is for a very specific repair: the passenger rear of an LED-equipped F-150 with blind-spot hardware after impact, water intrusion, broken mounting tabs, or lamp failure. It is not a conversion for halogen trucks and the BLIS sensor or module must be transferred if not included.\u003c\/p\u003e\n\u003cp\u003eConfirm LED versus halogen, BLIS provision, passenger side, connector, bed style, and all reference numbers. A lamp can look correct in photos and still be electrically incompatible.\u003c\/p\u003e\n\u003cp\u003eThis is a high-quality aftermarket replacement or service part and is not manufactured or supplied by the original equipment brand.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight passenger-side housing for factory LED and BLIS configuration\u003c\/li\u003e\n\u003cli\u003eRestores rear lighting and proper sensor mounting provision\u003c\/li\u003e\n\u003cli\u003eDirect body mounting layout for matching 2015-2017 trucks\u003c\/li\u003e\n\u003cli\u003eAftermarket collision-repair lamp identified by Ford references\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord F-150 (2015) with factory LED tail lamps and BLIS\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2016) with factory LED tail lamps and BLIS\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2017) with factory LED tail lamps and BLIS\u003c\/li\u003e\n\u003cli\u003eExcludes Ford F-150 Raptor and factory halogen\/non-BLIS configurations unless independently verified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHL3Z-13404-D\u003c\/li\u003e\n\u003cli\u003eFL3Z-13404-C\u003c\/li\u003e\n\u003cli\u003eFL3Z-13404-D\u003c\/li\u003e\n\u003cli\u003eFL3Z-13404-F\u003c\/li\u003e\n\u003cli\u003eFO2801259\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a cracked passenger lamp after bed-corner impact\u003c\/li\u003e\n\u003cli\u003eCorrecting moisture intrusion or failed integrated LED elements\u003c\/li\u003e\n\u003cli\u003eRestoring BLIS sensor mounting after lamp-housing damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED tail light assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear right passenger side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety System Provision:\u003c\/strong\u003e BLIS-compatible housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting Conversion:\u003c\/strong\u003e Not intended for halogen conversion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Type:\u003c\/strong\u003e Aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect power and protect the BLIS sensor from static and impact\u003c\/li\u003e\n\u003cli\u003eTransfer the original sensor or module only when compatible and required\u003c\/li\u003e\n\u003cli\u003eSeal connectors and inspect bed-side mounting geometry\u003c\/li\u003e\n\u003cli\u003eVerify every lamp function and complete any required BLIS calibration before road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003eNorthline Parts does its best to list all known compatible models, but the correct part may fit an application not shown. Model names and year ranges alone may not guarantee fitment. Always compare the original component, reference number, dimensions, connectors, engine or vehicle identification, and installed configuration before purchase.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Does the tail light include the BLIS sensor? \u003cstrong\u003eA:\u003c\/strong\u003e Do not assume it does; the sensor or module is commonly transferred from the original lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can this upgrade a halogen F-150 to LED? \u003cstrong\u003eA:\u003c\/strong\u003e No direct conversion is claimed. Wiring and control modules differ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Will it fit the driver side? \u003cstrong\u003eA:\u003c\/strong\u003e No. This is the right passenger-side assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e How should final fitment be confirmed? \u003cstrong\u003eA:\u003c\/strong\u003e Match the original component and every listed identifier and physical detail; contact Northline Parts with the model, serial number, VIN, engine code, or clear photos when additional help is needed.\u003c\/p\u003e\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\u003cp\u003ekeywords: F150 right LED tail light, HL3Z-13404-D replacement, 2015-2017 F150 BLIS lamp, Ford passenger tail lamp, F150 blind spot tail light repair\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42816477593671,"sku":"NLT1M01480","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/116662969628-0.jpg?v=1779761069"},{"product_id":"left-driver-tail-light-brake-lamp-w-blind-spot-for-ford-f150-xlt-2021-2023","title":"Left Tail Light with Blind-Spot Provision for Ford F-150 XLT 2021-2023","description":"\u003cp\u003e\u003cstrong\u003eAftermarket left driver-side tail light for compatible 2021-2023 Ford F-150 XLT trucks with the matching blind-spot-monitoring lamp configuration.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eA broken tail light on a BLIS-equipped F-150 is not just a lens problem: the lamp design and radar arrangement have to agree with the truck. This left assembly replaces the damaged rear lamp while preserving the correct blind-spot provision when the original configuration matches.\u003c\/p\u003e\u003cp\u003eFord offered halogen, LED, heated, non-heated, base, mid, high, and BLIS\/non-BLIS lamp variants. Compare the original part label, connector pins, light signature, radar-module location, lens shape, and trim equipment. Transfer of the original sensor may be required and calibration should follow Ford service information.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLeft driver-side rear lamp assembly\u003c\/li\u003e\n\u003cli\u003eDesigned around a matching blind-spot-monitoring configuration\u003c\/li\u003e\n\u003cli\u003eVehicle-specific connector and mounting studs\u003c\/li\u003e\n\u003cli\u003eReplacement for collision, lens, or internal lighting damage\u003c\/li\u003e\n\u003cli\u003eFactory lamp level and sensor transfer requirements must be matched\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord F-150 XLT 2021 with matching BLIS tail light configuration\u003c\/li\u003e\n\u003cli\u003eFord F-150 XLT 2022 with matching BLIS tail light configuration\u003c\/li\u003e\n\u003cli\u003eFord F-150 XLT 2023 with matching BLIS tail light configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacing a tail light broken in a bedside collision\u003c\/li\u003e\n\u003cli\u003eRepairing water entry through a cracked housing\u003c\/li\u003e\n\u003cli\u003eRestoring rear lighting on a BLIS-equipped XLT\u003c\/li\u003e\n\u003cli\u003eCompleting body repair while retaining blind-spot capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tail Light Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear left \/ driver side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Model:\u003c\/strong\u003e Ford F-150 XLT 2021-2023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Feature:\u003c\/strong\u003e Blind-spot provision where matched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Type:\u003c\/strong\u003e Aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRead the original lamp label and connector before ordering\u003c\/li\u003e\n\u003cli\u003eDisconnect power and protect the bedside paint\u003c\/li\u003e\n\u003cli\u003eTransfer the BLIS radar module only if the lamp is designed for it\u003c\/li\u003e\n\u003cli\u003eInspect body seals and harnesses for impact damage\u003c\/li\u003e\n\u003cli\u003eTest all lamp functions and complete any required BLIS calibration before relying on alerts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\u003cp\u003eNorthline Parts does its best to list all known compatible models, but the correct part may fit an application not shown.\u003c\/p\u003e\u003cp\u003eModel, production date, serial number, engine or equipment configuration, installed options, and previous repairs can affect fitment. Compare the original part, identifying numbers, dimensions, connections, and mounting details before purchase.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Does the lamp include the blind-spot radar sensor? \u003cstrong\u003eA:\u003c\/strong\u003e Do not assume so. Many replacement lamps require transfer of the original module; confirm the pictured contents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Will it fit an XL or Lariat? \u003cstrong\u003eA:\u003c\/strong\u003e Fitment is written for compatible XLT configurations. Lamp level and connector must match regardless of trim name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can I use a non-BLIS lamp on a BLIS truck? \u003cstrong\u003eA:\u003c\/strong\u003e No. The housing, module location, wiring, and system requirements differ.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Why might calibration be required? \u003cstrong\u003eA:\u003c\/strong\u003e A moved or replaced radar module can need aiming or diagnostic initialization before the warning system is dependable.\u003c\/p\u003e\u003ch3\u003ePart Summary\u003c\/h3\u003e\u003cp\u003ekeywords: 2021-2023 F150 XLT tail light, Ford left BLIS tail lamp, F150 blind spot light replacement, driver side F150 rear lamp, Ford truck collision tail light, BLIS radar lamp housing, aftermarket F150 XLT tail light\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42816664436807,"sku":"NLT1Q02351","price":100.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/116713614552-1.jpg?v=1779766079"},{"product_id":"driver-left-side-lh-tail-light-for-2018-2020-ford-f150-led-w-blind-spot","title":"Left LED Tail Light with Blind Spot for 2018-2020 Ford F-150 KL3Z-13405-B","description":"\u003cp\u003e\u003cstrong\u003eThis aftermarket left LED tail-light assembly replaces KL3Z-13405-B for compatible 2018-2020 Ford F-150 trucks equipped with the matching blind-spot-monitoring lamp configuration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eA cracked lens, condensation, dead LED section, or collision-damaged housing can take out both lighting and the blind-spot hardware mounted at the rear corner. This driver-side assembly restores the correct LED housing style for trucks built with BLIS when the module, harness, and vehicle electronics remain serviceable.\u003c\/p\u003e\n\u003cp\u003eFord used several tail-lamp combinations with and without LED lighting or blind-spot monitoring. Match the left-side lens pattern, plugs, module mounting area, production date, and KL3Z-13405-B before purchase. Programming or calibration may be required if electronic components are transferred or replaced.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver-side LED tail-lamp housing for compatible BLIS-equipped trucks\u003c\/li\u003e\n\u003cli\u003eVehicle-specific 2018-2020 F-150 lens and mounting profile\u003c\/li\u003e\n\u003cli\u003eReplacement for crash, water, or LED housing damage\u003c\/li\u003e\n\u003cli\u003eCross-references KL3Z-13405-B\u003c\/li\u003e\n\u003cli\u003eSupports transfer of required modules or hardware when applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord F-150 with LED tail lamps and blind-spot monitoring (2018)\u003c\/li\u003e\n\u003cli\u003eFord F-150 with LED tail lamps and blind-spot monitoring (2019)\u003c\/li\u003e\n\u003cli\u003eFord F-150 with LED tail lamps and blind-spot monitoring (2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKL3Z-13405-B\u003c\/li\u003e\n\u003cli\u003eKL3Z13405B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a driver-side lamp with a broken lens\u003c\/li\u003e\n\u003cli\u003eCorrecting water intrusion into the LED housing\u003c\/li\u003e\n\u003cli\u003eCompleting bedside or rear-corner collision repair\u003c\/li\u003e\n\u003cli\u003eRestoring the proper BLIS-compatible lamp configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED tail-light assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement:\u003c\/strong\u003e Rear left \/ driver side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Feature:\u003c\/strong\u003e Blind-spot monitoring compatible configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New aftermarket replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify LED and BLIS equipment before removing the old lamp\u003c\/li\u003e\n\u003cli\u003eCompare every connector and module mounting point\u003c\/li\u003e\n\u003cli\u003eTransfer original modules only when required and undamaged\u003c\/li\u003e\n\u003cli\u003eInspect the bedside pockets and harness for water or crash damage\u003c\/li\u003e\n\u003cli\u003eTest lighting and blind-spot functions and perform calibration if specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003eNorthline Parts does its best to list all known compatible models. The correct part may fit an application that is not shown above. Model year, production date, serial number, engine or equipment specification, installed options, and previous repairs can change fitment. Match the original part, reference number, dimensions, connectors, mounting points, and the product photos before purchase.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Will this fit a truck with halogen tail lights? \u003cstrong\u003eA:\u003c\/strong\u003e No. It is for the matching LED and blind-spot configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Is the blind-spot radar module included? \u003cstrong\u003eA:\u003c\/strong\u003e Do not assume it is included; compare package photos and plan to transfer serviceable electronics if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Which side is this lamp for? \u003cstrong\u003eA:\u003c\/strong\u003e It is for the rear-left, or driver-side, corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Is this an original-equipment part? \u003cstrong\u003eA:\u003c\/strong\u003e No. This is a new aftermarket product. Brand names and part numbers are used only to identify compatible applications.\u003c\/p\u003e\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\u003cp\u003ekeywords: KL3Z-13405-B F150 tail light, 2018-2020 Ford F-150 left LED lamp, F150 BLIS tail light replacement, driver side blind spot tail lamp, Ford truck cracked LED rear light\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, specifications, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42817268351047,"sku":"NLT1C02122","price":290.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/116658610877-0.jpg?v=1779771619"},{"product_id":"left-right-tail-lights-for-2015-2020-ford-f150-f-150-black-housing-led","title":"Black LED Tail Light Pair for 2015-2020 Ford F-150","description":"\u003cp\u003e\u003cstrong\u003eThis aftermarket left-and-right black-housing LED tail-light pair fits compatible 2015-2020 Ford F-150 pickup configurations using the matching lamp connectors and body openings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eA cracked lens after backing into a trailer, condensation inside the housing, failed LEDs, or a planned blackout look can all lead to a new tail-light pair. Replacing both sides keeps the lens color, brightness, and exterior style consistent.\u003c\/p\u003e\n\u003cp\u003eFord used halogen and factory-LED rear lamps with different wiring, blind-spot features, connectors, and module requirements. These lamps should not be treated as interchangeable with every F-150 option. Compare the original connector, lamp technology, BLIS sensor arrangement, bed style, and product photos before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatched driver- and passenger-side tail-light assemblies\u003c\/li\u003e\n\u003cli\u003eBlack housings for a darker rear appearance\u003c\/li\u003e\n\u003cli\u003eLED lighting design\u003c\/li\u003e\n\u003cli\u003eApplication-specific outer shape for compatible 2015-2020 F-150 beds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord F-150 (2015)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2016)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2017)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2018)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2019)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2020 compatible lighting configurations)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a lamp cracked in a parking or trailer accident\u003c\/li\u003e\n\u003cli\u003eCorrecting moisture damage or failed internal LEDs\u003c\/li\u003e\n\u003cli\u003eChanging both rear lamps for a matched custom look\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e LED tail-light assembly set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 lamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement:\u003c\/strong\u003e Rear left and right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New aftermarket lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect battery power before changing connectors\u003c\/li\u003e\n\u003cli\u003eTransfer bulbs, modules, resistors, or sensors only when required and compatible\u003c\/li\u003e\n\u003cli\u003eSeal body grommets and check for water entry\u003c\/li\u003e\n\u003cli\u003eTest running, brake, turn, reverse, and warning functions before driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003eNorthline Parts does its best to list all known compatible models. The correct part may fit an application that is not shown above. Model year, production date, serial number, engine or equipment specification, installed options, and previous repairs can change fitment. Match the original part, reference number, dimensions, connectors, mounting points, and product photos before purchase.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Do these fit factory halogen and factory LED trucks? \u003cstrong\u003eA:\u003c\/strong\u003e Not automatically. Connector and electronics differ, so match the original lamp type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Are BLIS sensors included? \u003cstrong\u003eA:\u003c\/strong\u003e Do not assume so; compare the listing photos and transfer requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Why buy a pair after one lamp breaks? \u003cstrong\u003eA:\u003c\/strong\u003e A pair gives both sides matching style, clarity, and light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Is this an original-equipment part? \u003cstrong\u003eA:\u003c\/strong\u003e No. This is a new aftermarket product. Brand names and part numbers are used only to identify compatible applications.\u003c\/p\u003e\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\u003cp\u003ekeywords: 2015-2020 F150 LED tail lights, Ford F-150 black tail lamp pair, truck rear light replacement, F150 cracked tail light repair, left right LED tail lamps\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, specifications, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42817291649095,"sku":"NLT1C00185","price":181.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/116544066494-0.jpg?v=1779771837"},{"product_id":"for-ford-f-150-2021-2022-2023-led-rear-tail-light-lamp-w-blind-spot-left-side","title":"LED Left Tail Light for 2021-2023 Ford F-150 with Blind Spot ML3Z-13405-D","description":"\u003cp\u003e\u003cstrong\u003eThis left driver-side LED tail lamp is made for 2021-2023 Ford F-150 trucks with the matching blind-spot\/BLIS rear-light setup. It cross-references the ML3Z-13405-D lamp family and replaces the complete outer rear lamp assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eA cracked F-150 tail lamp can cause more than a cosmetic problem when the housing contains LED electronics and blind-spot-related hardware. Moisture intrusion, collision damage or an internal LED failure can leave warning messages or lighting problems that a bulb replacement will never fix.\u003c\/p\u003e\u003cp\u003eThis assembly is for trucks using the corresponding LED\/BLIS configuration on the left side. Because Ford offered multiple tail-lamp packages on the same model year, the connector, lamp number and blind-spot equipment must all match before the old lamp is removed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft LED outer tail-lamp assembly\u003c\/li\u003e\n\u003cli\u003eFor the matching BLIS\/blind-spot configuration\u003c\/li\u003e\n\u003cli\u003eCross-references the ML3Z-13405-D lamp family\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel \/ Trim\u003c\/th\u003e\n\u003cth\u003eEngine \/ Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150 King Ranch \/ Lariat \/ Limited \/ Platinum and other listed premium trims with matching LED-BLIS lamp\u003c\/td\u003e\n\u003ctd\u003e2.7L EcoBoost, 3.5L EcoBoost, 3.5L PowerBoost hybrid or 5.0L V8 depending trim\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150 Raptor \/ Police Responder \/ SSV and other documented applications where the same LED-BLIS housing is used\u003c\/td\u003e\n\u003ctd\u003eEngine varies; exact lamp option determines fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eReplaces Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAftermarket cross-reference: ML3Z-13405-D \/ ML3Z13405D\u003c\/li\u003e\n\u003cli\u003eFord uses multiple suffixes and lamp levels on 2021-2023 F-150; compare the complete number on your original lamp before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacing a cracked or water-damaged left LED tail lamp\u003c\/li\u003e\n\u003cli\u003eRepairing left-rear collision damage on a BLIS-equipped F-150\u003c\/li\u003e\n\u003cli\u003eCorrecting lamp failure when the LED assembly itself has failed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLeft \/ driver-side rear tail-light assembly\u003c\/li\u003e\n\u003cli\u003eLED lamp configuration as listed\u003c\/li\u003e\n\u003cli\u003eFor 2021-2023 F-150 body style\u003c\/li\u003e\n\u003cli\u003eDesigned for the blind-spot \/ BLIS-style lamp configuration\u003c\/li\u003e\n\u003cli\u003eAftermarket direct replacement; sensor module is not assumed included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage includes:\u003c\/strong\u003e 1 left \/ driver-side rear tail-light assembly Blind-spot radar\/sensor module only if it is visibly included with the exact product; otherwise reuse the original module\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\u003cp\u003eDo not buy this by year and body shape alone. Match left side, LED lamp type, connector, BLIS\/sensor mounting provision and the complete engineering\/service number from the original lamp. Ford service-number conventions and aftermarket cross-reference tables are not always consistent on these lamps.\u003c\/p\u003e\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\u003cp\u003eMatch the complete original lamp number, left side, LED configuration and BLIS\/blind-spot equipment. Visually similar halogen or non-BLIS lamps are not interchangeable.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use this on an F-150 without blind-spot monitoring?\u003c\/strong\u003e\u003cbr\u003eOnly if the original lamp and connector match the same configuration. Ford used different tail lamps for different equipment packages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the LEDs be replaced like a normal bulb?\u003c\/strong\u003e\u003cbr\u003eMany functions are integrated into the lamp assembly; if the internal LED section fails, complete lamp replacement may be required.\u003c\/p\u003e\u003ch3\u003ePart Summary\u003c\/h3\u003e\u003cp\u003eKeywords: 2021 F150 LED tail light, 2022 F-150 blind spot tail lamp, 2023 F150 driver tail light, ML3Z-13405-D, Ford F150 BLIS tail light, F150 left LED rear lamp\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42817445724231,"sku":"NLT2V00862","price":191.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/57_fd50fd63-e6da-4a1a-891d-063f896031ce.png?v=1779773098"},{"product_id":"for-2018-2020-ford-f-150-kl3z13404b-led-tail-light-lamp-right-passenger-side","title":"KL3Z-13404-B Right LED Tail Light with BLIS for 2018-2020 Ford F-150","description":"\u003cp\u003e\u003cstrong\u003eThis is a brand new right\/passenger-side LED tail light for 2018-2020 Ford F-150 trucks equipped with the factory LED and blind-spot-monitoring lamp configuration. It matches Ford reference KL3Z-13404-B.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eA cracked F-150 tail lamp can create more than a lighting problem when the blind-spot radar is mounted in or behind the lamp area. Water intrusion, broken tabs, failed LEDs, or collision damage can affect both rear visibility and the BLIS system if the wrong replacement housing is installed.\u003c\/p\u003e\n\n\u003cp\u003eFord catalogs KL3Z-13404-B for the passenger side with LED and Blind Spot Monitor. A non-BLIS LED lamp and a halogen lamp are different assemblies even though they fit the same bedside opening.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBuilt as a complete replacement assembly for the listed lighting position\u003c\/li\u003e\n\u003cli\u003eHelps restore a secure lens\/housing and dependable visibility when the original unit is damaged\u003c\/li\u003e\n\u003cli\u003eUses the factory-style mounting area for the compatible application\u003c\/li\u003e\n\u003cli\u003eProduct Type: Tail light assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e2018 Ford F-150 - factory LED tail lights with BLIS, production\/configuration matching KL3Z-13404-B\u003c\/li\u003e\n\u003cli\u003e2019 Ford F-150 - LED with BLIS\u003c\/li\u003e\n\u003cli\u003e2020 Ford F-150 - LED with BLIS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReplaces Part Numbers\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eFord: KL3Z-13404-B\u003c\/li\u003e\n\u003cli\u003eReplaces JL3Z-13404-C, JL3Z-13404-F, KL3Z-13404-A where cataloged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eReplacing a cracked, water-damaged, faded, or non-working original lamp\u003c\/li\u003e\n\u003cli\u003eRepairing collision damage without replacing unrelated body panels\u003c\/li\u003e\n\u003cli\u003eRestoring matched lighting appearance after one or both original assemblies have failed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tail light assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear right \/ passenger side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlind Spot:\u003c\/strong\u003e For BLIS-equipped lamp configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Type:\u003c\/strong\u003e Aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eDisconnect vehicle power as appropriate before working on lighting connectors\u003c\/li\u003e\n\u003cli\u003eCompare every plug, mounting tab, bulb\/LED configuration and included component to the original lamp\u003c\/li\u003e\n\u003cli\u003eTest all lighting functions before fully reinstalling bumper or trim pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\n\u003cp\u003eMatch LED + BLIS equipment exactly. A lamp for a truck without BLIS or without factory LED lighting is not interchangeable simply because the housing outline is similar.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can a bad bulb be the only problem? \u003cstrong\u003eA:\u003c\/strong\u003e Yes. Check bulbs, fuses, grounds and wiring where applicable before replacing a complete housing. A cracked housing, failed LED section, broken mount or internal moisture points to the assembly itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e How do I confirm this is the correct lamp? \u003cstrong\u003eA:\u003c\/strong\u003e Match the year\/model information above with the side, light technology, connector, mounting tabs, and any factory options such as BLIS, LEDs, sensors or special bumper packages.\u003c\/p\u003e\n\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\n\u003cp\u003ekeywords: KL3Z-13404-B, Ford F150 LED tail light, 2018 F150 passenger tail lamp, F150 BLIS tail light, 2020 Ford truck right tail light, KL3Z13404B\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42817544552519,"sku":"NLT2V00922","price":211.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/57_ae79d45a-5735-4c47-8123-495571c3225d.png?v=1779773745"},{"product_id":"for-ford-f150-f-150-xlt-2021-2023-tail-light-brake-lamp-driver-side-w-blind-spot","title":"Driver Tail Light with Blind Spot for 2021-2023 Ford F-150 XLT","description":"\u003cp\u003e\u003cstrong\u003eThis is a brand new driver-side tail light for 2021-2023 Ford F-150 XLT trucks equipped with the matching blind-spot-monitoring lamp configuration. It is intended to replace the left rear lamp without deleting the factory BLIS setup.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\n\u003cp\u003eOn newer F-150s, choosing a tail light by lens shape alone can create warning messages or leave the blind-spot system unsupported. A cracked housing can also let water reach the connector or radar mounting area, so the replacement needs to match the truck’s original lighting and BLIS equipment.\u003c\/p\u003e\n\n\u003cp\u003eFord used several 2021-2023 tail-lamp levels. Non-LED\/BLIS trucks commonly use ML3Z-13405-C on the driver side, while higher LED trims use different NL3Z assemblies. Check the number on the original lamp before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Performance\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBuilt as a complete replacement assembly for the listed lighting position\u003c\/li\u003e\n\u003cli\u003eHelps restore a secure lens\/housing and dependable visibility when the original unit is damaged\u003c\/li\u003e\n\u003cli\u003eUses the factory-style mounting area for the compatible application\u003c\/li\u003e\n\u003cli\u003eProduct Type: Tail light \/ brake lamp assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e2021-2023 Ford F-150 XLT - driver-side lamp with factory BLIS and matching light type\u003c\/li\u003e\n\u003cli\u003eSelect similarly equipped 2021-2023 F-150 trims using the same left lamp configuration\u003c\/li\u003e\n\u003cli\u003eNot compatible with every LED level or trucks equipped with different tail-lamp architecture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReplaces Part Numbers\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eCommon non-LED\/BLIS driver-side reference: ML3Z-13405-C; verify original lamp number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Uses\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eReplacing a cracked, water-damaged, faded, or non-working original lamp\u003c\/li\u003e\n\u003cli\u003eRepairing collision damage without replacing unrelated body panels\u003c\/li\u003e\n\u003cli\u003eRestoring matched lighting appearance after one or both original assemblies have failed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tail light \/ brake lamp assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear left \/ driver side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlind Spot:\u003c\/strong\u003e For BLIS-equipped configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Type:\u003c\/strong\u003e Aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eDisconnect vehicle power as appropriate before working on lighting connectors\u003c\/li\u003e\n\u003cli\u003eCompare every plug, mounting tab, bulb\/LED configuration and included component to the original lamp\u003c\/li\u003e\n\u003cli\u003eTest all lighting functions before fully reinstalling bumper or trim pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\n\u003cp\u003eMatch BLIS, LED\/non-LED level, connector and original part number. Some 2021-2023 F-150 configurations with Onboard Scales or higher-level LED lamps use different assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can a bad bulb be the only problem? \u003cstrong\u003eA:\u003c\/strong\u003e Yes. Check bulbs, fuses, grounds and wiring where applicable before replacing a complete housing. A cracked housing, failed LED section, broken mount or internal moisture points to the assembly itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e How do I confirm this is the correct lamp? \u003cstrong\u003eA:\u003c\/strong\u003e Match the year\/model information above with the side, light technology, connector, mounting tabs, and any factory options such as BLIS, LEDs, sensors or special bumper packages.\u003c\/p\u003e\n\n\u003ch3\u003ePart Summary\u003c\/h3\u003e\n\n\u003cp\u003ekeywords: 2021 F150 XLT tail light, 2023 Ford F150 driver tail lamp, F150 blind spot tail light, ML3Z-13405-C, Ford BLIS rear lamp, F150 left brake light\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eBrand names, model numbers, and reference part numbers are used for identification and compatibility purposes only. Verify the original component, dimensions, and application before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Northline Parts","offers":[{"title":"Default Title","offer_id":42817547010119,"sku":"NLT2V00935","price":90.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/7123\/5399\/files\/57_0e0d0109-f5cb-4b12-8772-0d97a7b3205f.png?v=1779773761"}],"url":"https:\/\/www.northlineparts.com\/collections\/ford-f-150-tail-lights.oembed","provider":"Northline Parts","version":"1.0","type":"link"}